| Alternative NSN: 4720-01-426-4987 |
| Item Name: Hose Assembly Nonme |
| CAGE Code : 1CC45 , A236N , 81300 |
| NIIN: 014264987 |
| FSC Name: 4720 Hose and Flexible Tubing |
| NCB Code: USA (01) |
| Manufacturers: mac gregor usa inc , macgregor sweden ab , parker hannifin corporation |
|
Part No Part No
|
Manufacturer |
Item Name Item Name
|
QTY QTY
|
RFQ RFQ
|
|---|---|---|---|---|
| 23-06274 ITEM 26 | mac gregor usa inc | hose assembly nonme | Avl | |
| 8BX-25 | mac gregor usa inc | hose assembly nonme | Avl | |
| 23-06274 ITEM 26 | macgregor sweden ab | hose assembly nonme | Avl | |
| 8BX-25 | macgregor sweden ab | hose assembly nonme | Avl | |
| 8BX-25 | parker hannifin corporation | hose assembly nonme | Avl |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 3B 1ST END |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| CRWL | Inside Surface Condition | SMOOTH |
| CQGM | Maximum Operating Pressure | 3500.0 POUNDS PER SQUARE INCH |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| CRDW | Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| AAJD | Thread Class | 3A 2ND END |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AKUU | End Connection Design | STRAIGHT 2ND END |
| THSD | Thread Series Designator | UNJF 2ND END |
| CRXX | Measuring Method And Length | 25.000 INCHES NOMINAL OVERALL |
| THSD | Thread Series Designator | UNJ 1ST END |
| CQBD | Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| ABKV | Outside Diameter | 0.870 INCHES NOMINAL |
| AWLS | Connection Type | THREADED EXTERNAL BOSS 2ND END |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF |
| MRC | Decoded Requirement | Clear Text Reply |
| AARX | Inside Diameter | 0.500 INCHES NOMINAL |
| AHNC | Connection Style | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| ACKH | Minimum Inside Bending Radius | 7.000 INCHES |
| AGAV | End Item Identification | USED ON STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| CQJX | Nominal Thread Size | 0.750 INCHES 2ND END |
| CQJX | Nominal Thread Size | 0.875 INCHES 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CMLP | Thread Quantity Per Inch | 14 1ST END |
Before You Go, You Should Consider Looking at Our NSN Parts Catalog. and Remember, ASAP Sourcing Solutions Has Some of the Fastest and Most Competitive Quotes On the Market.
Request for Quote